A clean, quiet finish
Cylindrical end caps and matching brackets keep the hardware simple. Black adds definition, White blends into a light wall, and Gold brings a warmer accent.
Adjustable Curtain Rod
Shipping & returns
Free standard US shipping. See our shipping policy for current timing.
Damaged, defective or incorrect item? Contact us within 14 days of delivery.
Product details
SMALL DETAILS, FINISHED ROOM
Made to work with your curtains.
One rod, an adjustable span
Thread the sections together and adjust the telescoping end to your measured span. The main rod is 1″ across; the inner telescoping section is ⅞″.
Check the opening first
For grommet, back-tab and rod-pocket curtains with openings that clear the rod and joins. Support brackets interrupt curtain travel; arrange panels on either side.
Measuring & fit
MEASURE ONCE, CHOOSE WELL
Size the rod to the span.
Measure the full distance you want the rod to cover, including space past each side of the window. The planned rod span must fit inside your chosen range.
Enter the installed span, not just the glass width.
Illustration for measuring. Allow room for the end caps and check wall clearance before drilling.
What's included
READY TO ASSEMBLE
What comes in the kit.
Rod sections, two end caps, mounting brackets, screws, wall anchors and instructions. Tools and curtains are separate. Use fixings appropriate to your wall.
Installation
PUT IT ALL TOGETHER
Installation, step by step.
You'll need a tape measure, pencil, level, drill, screwdriver and suitable access. Check the wall type and the instructions packed with your kit before starting.
Measure and mark
Choose the span and height. Mark level bracket positions, including all required supports.
Fix the brackets
Check for concealed services before drilling. Secure the brackets into a suitable structure or with wall-appropriate anchors.
Build the rod
Join the threaded sections for your span. Fine-tune the telescoping section without extending beyond the selected range.
Hang and secure
Slide the curtains on, fit the end caps and seat the rod in the brackets. Tighten the retaining screws and check the fixing before use.
This is a drilled wall-mount kit. Included anchors are not suitable for every wall. Keep all required supports in place and follow the packed instructions for your exact size.
Add curtains
COMPLETE THE WINDOW
The rod. The curtains.
One considered choice.
Choose curtains for the same window and add both to your bag. Each item stays separate, so your finish, fabric shade and curtain length are clear.
Curtain size is per panel. Rod size is the assembled range. For a fuller look, aim for about twice the installed rod span in total flat curtain width.
Questions
A FEW GOOD QUESTIONS
Before you choose.
Is this one continuous telescoping rod?
It uses connected fixed sections and a telescoping end. Add or remove sections to reach the assembled range, then adjust the end to your span.
Can I use it without drilling?
This kit mounts with brackets and screws. It is not a tension rod or an adhesive no-drill kit.
Can a curtain pass the center brackets?
Ordinary grommet, tab and pocket curtains cannot pass through a support bracket. Divide the panels around the supports and plan where you want them to open.
Does it include curtains or rings?
The rod kit includes hardware only. The optional curtain bundle adds the curtains selected above as separate items. Rings are not included.
What if I need help with fit?
Send your window width, planned rod span and curtain heading to support@onacurtains.com before ordering. Check curtain length from the planned hanging position to your preferred hem.